No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C00 Configuration Guide - MPLS 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Global MPLS LDP Functions

Configuring Global MPLS LDP Functions

Global LDP must be enabled on each node before LDP services can be configured in an MPLS domain.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    mpls lsr-id lsr-id

    The LSR ID of the local node is configured.

    When configuring an LSR ID, note the following:
    • LSR IDs must be set before you run other MPLS commands.

    • An LSR ID must be manually configured because no default LSR ID is available.

    • Using the IP address of a loopback interface on an LSR as an LSR ID is recommended.

      NOTICE:

      The undo mpls command deletes all MPLS configurations, including the established LDP sessions and LSPs.

  3. Run:

    mpls

    MPLS is enabled globally, and the MPLS view is displayed.

  4. Run:

    mpls ldp

    MPLS LDP is enabled globally, and the MPLS-LDP view is displayed.

  5. (Optional) Run:

    lsr-id lsr-id

    The LSR ID is set for an LDP instance.

    An MPLS LSR ID is usually used as the LSR ID of an LDP instance. When VPN instances are used, such as a BGP/MPLS VPN, if the VPN address space and public network address space overlap, set LSR IDs for LDP instances so that TCP connections for LDP sessions can be properly established.

  6. Run:

    commit

    The configurations are committed.

Download
Updated: 2018-07-12

Document ID: EDOC1100028530

Views: 101337

Downloads: 336

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next