No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C00 Configuration Guide - MPLS 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking the Configurations

Checking the Configurations

After the LDP multi-instance is configured, you can view information about LDP of the specified VPN instance.

Prerequisites

The LDP multi-instance function has been configured.

Procedure

  • Run the display mpls ldp vpn-instance vpn-instance-name command to check information about LDP of a specified VPN instance.

Example

After completing the configuration, run the display mpls ldp vpn-instance command to view information about LDP of a specified VPN instance.

<HUAWEI> display mpls ldp vpn-instance vpn1
                           LDP Global Information
 --------------------------------------------------------------------------------
 Protocol Version        : V1           Neighbor Liveness    : 60 Sec
 Graceful Restart        : Off          FT Reconnect Timer   : 60 Sec
 MTU Signaling           : On           Recovery Timer       : 60 Sec
                          LDP Instance Information
 --------------------------------------------------------------------------------
 Instance ID             : 1            VPN-Instance         : vpn1
 Instance Status         : Active       LSR ID               : 1.1.1.9
 Hop Count Limit         : 32           Path Vector Limit    : 32
 Loop Detection          : Off
 DU Re-advertise Timer   : 30 Sec       DU Re-advertise Flag : On
 DU Explicit Request     : Off          Request Retry Flag   : On
 Label Distribution Mode : Ordered      Label Retention Mode : Liberal
 Instance Deleting State : No           Instance Reseting State : No 
 --------------------------------------------------------------------------------
Download
Updated: 2018-07-12

Document ID: EDOC1100028530

Views: 102916

Downloads: 336

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next