No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C00 Configuration Guide - MPLS 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Adjusting Dynamic BFD Parameters

(Optional) Adjusting Dynamic BFD Parameters

You can adjust BFD parameters, including the minimum interval at which BFD packets are sent, the minimum interval at which BFD packets are received, and the BFD detection multiplier.

Context

Perform the following steps on each root and leaf node:

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    bfd

    The BFD view is displayed.

  3. Run:

    quit

    The system view is displayed.

  4. Run:

    mpls

    The MPLS view is displayed.

  5. (Optional) Run:

    mpls mldp p2mp bfd-tunnel { min-tx-interval tx-interval | detect-multiplier multiplier } *

    The minimum interval at which BFD packets are sent, the minimum interval at which BFD packets are received, and the BFD detection multiplier are set.

  6. Run:

    commit

    The configuration is committed.

Download
Updated: 2018-07-12

Document ID: EDOC1100028530

Views: 101358

Downloads: 336

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next