No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C00 Configuration Guide - MPLS 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring LDP Graceful Deletion

(Optional) Configuring LDP Graceful Deletion

LDP graceful deletion can be configured to speed up LDP FRR traffic switching.

Context

LDP graceful deletion can be configured in the LDP-IGP synchronization or LDP FRR scenario to speed up traffic switching. It helps uninterruptedly transmit traffic during traffic switching, which improves reliability of the entire network.

If the primary link goes Down and the LDP session on the primary link also goes Down, LDP immediately instructs the upstream device to withdraw labels and triggers LDP Auto FRR. LSP convergence on the secondary link requires LDP to assign labels to the upstream device again, which prolongs the convergence time and FRR traffic switching. As a result, packet loss occurs.

If LDP graceful deletion is configured and the LDP session goes Down, LDP delays deleting the LDP session and keeps the relevant labels and LSP. The LSP on the secondary link does not require LDP to assign labels to the upstream device again, which shortens FRR traffic switching and reduces packet loss.

Perform the following steps on the LDP FRR-enabled LSR:

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    mpls ldp

    The MPLS-LDP view is displayed.

  3. Run:

    graceful-delete

    LDP graceful deletion is enabled.

  4. (Optional) Run:

    graceful-delete timer timer

    The graceful deletion timer value is set.

    After the LDP session goes Down, forwarding entries on the LSR remain before the graceful deletion timer expires.

    NOTE:

    If the graceful deletion timer value is too large, the invalid LSP will be kept for a long time, which consumes system resources.

  5. Run:

    commit

    The configurations are committed.

Download
Updated: 2018-07-12

Document ID: EDOC1100028530

Views: 101657

Downloads: 336

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next