No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C00 Configuration Guide - MPLS 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring Timers for the GR Helper

(Optional) Configuring Timers for the GR Helper

You can set the values of an LDP Reconnect timer and an LDP Recovery timer for the GR Helper.

Context

Timers associated with LDP GR are as follows:
  • Reconnect timer: the timer for reconnecting an LDP session. After an AMB/SMB switchover on the GR Restarter is complete, an LDP session between the GR Helper and Restarter fails to be set up. The GR Helper starts a Reconnect timer to wait for reestablishing an LDP session.
    • If an LDP session is not set up between the GR Helper and Restarter after the Reconnect timer expires, the GR Helper immediately deletes MPLS forwarding entries associated with the GR Restarter and exits from the GR process.

    • If the LDP session is reestablished before the Reconnect timer expires, the GR Helper deletes the Reconnect timer and starts a Recovery timer.

  • Recovery timer: the timer for restoring an LSP. After the LDP session is reestablished, the GR Helper starts a Recovery timer to wait for the LSP to be restored.
    • If the Recovery timer expires, the GR Helper considers that the neighbor GR process ends and deletes the LSP that is not restored.

    • If all LSPs are restored before the Recovery timer expires, the GR Helper considers that the neighbor GR process ends after the Recovery timer expires.

  • Neighbor-liveness timer: the duration of the LDP GR process.

NOTE:

Modifying the value of an LDP GR-associated timer leads to a reestablishment of an LDP session.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    mpls ldp

    The MPLS-LDP view is displayed.

  3. Run:

    graceful-restart timer reconnect timer

    The Reconnect timer value is set.

    The Reconnect timer value that takes effect is the smaller value between the Neighbor-liveness timer configured on the GR Helper and the Reconnect timer configured on the GR Restarter.

  4. Run:

    graceful-restart timer recovery timer

    The Recovery timer value is set.

    The Recovery timer value that takes effect is the smaller value between the Recovery timer configured on the GR Helper and the Recovery timer configured on the GR Restarter.

  5. Run:

    graceful-restart timer neighbor-liveness timer

    The Neighbor-liveness timer value is set.

    When the reconnection time of an LDP session is negotiated in an LDP GR process, the value of the Neighbor-liveness timer is the smaller value between the Neighbor-liveness timer configured on the GR Helper and the Reconnect timer configured on the GR Restarter.

  6. Run:

    commit

    The configurations are committed.

Download
Updated: 2018-07-12

Document ID: EDOC1100028530

Views: 103207

Downloads: 336

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next