No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C00 Configuration Guide - MPLS 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking the Configurations

Checking the Configurations

After configuring LDP entropy label capability, you can check entropy label information.


The entropy label capability has been configured.


  • Run the display default-parameter mpls ldp command to check default MPLS LDP configurations.


Run the following commands to check the previous configuration.

Run the display default-parameter mpls ldp command to view default MPLS LDP configurations.

<HUAWEI> display default-parameter mpls ldp
 LDP Default Values:                                                 
          Protocol version                     : V1     
          Graceful restart                     : Off    
            Neighbor liveness(sec)             : 600                                  
            FT reconnect timer(sec)            : 300                                  
            Recovery timer(sec)                : 300                                  
          MTU signaling                        : On                                   
          Label retention mode                 : Liberal                              
          Label distribution mode              : Ordered                              
          Label advertisement                  : DU                                   
          Local hello-hold timer(sec)          : 15                                   
          Remote hello-hold timer(sec)         : 45                                   
          Keepalive-hold timer(sec)            : 45                                   
          Backoff timer init(sec)              : 15                                   
          Backoff timer max(sec)               : 120                                  
          IGP-Sync delay timer(sec)            : 10
          Graceful delete                      : Off
            Graceful delete timer(sec)         : 5
          Capability-announcement              : Off
          Session Protection                   : Off
            Duration timer(sec)                : 86400
          mLDP MBB Capability                  : Off
          mLDP P2MP Capability                 : Off
          mLDP MP2MP Capability                : Off
          mLDP Recursive                       : Off
          mLDP Frr                             : On  
          mLDP Label Withdraw Delay Timer(sec) : 2
          mLDP MBB Wait Ack Timer(sec)         : 60
          mLDP MBB Switch Delay Timer(ms)      : 100
          Entropy Label                        : Off
Updated: 2018-07-12

Document ID: EDOC1100028530

Views: 101491

Downloads: 336

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next