No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C00 Configuration Guide - MPLS 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking the Configurations

Checking the Configurations

After configuring the LDP security features, you can view the configurations of LDP MD5 authentication, LDP keychain authentication, and the LDP GTSM.

Prerequisites

LDP security features have been configured.

Procedure

  • Run the display mpls ldp session verbose command to check the configurations of LDP MD5 authentication and LDP keychain authentication.
  • Run the display gtsm statistics { slot-id | all } command to check GTSM statistics.

Example

Run the display mpls ldp session verbose command to view the LDP MD5 authentication status and the globally referenced keychain authentication name.

<HUAWEI> display mpls ldp session verbose
                LDP Session(s) in Public Network
 ------------------------------------------------------------------------
 Peer LDP ID     : 2.2.2.2:0            Local LDP ID   : 1.1.1.1:0
 TCP Connection  : 1.1.1.1 <- 2.2.2.2
 Session State   : Operational          Session Role   : Passive
 Session FT Flag : On                   MD5 Flag       : Off
 Reconnect Timer : 400 Sec              Recovery Timer : 400 Sec 
 Keychain Name   : kc1
 Authentication applied : Peer-group list1

 Negotiated Keepalive Hold Timer   : 45 Sec
 Configured Keepalive Send Timer   : 30 Sec
 Keepalive Message Sent/Rcvd       : 16848/16848 (Message Count)
 Label Advertisement Mode          : Downstream Unsolicited
 Label Resource Status(Peer/Local) : Available/Available
 Session Age                       : 0002:22:11  (DDDD:HH:MM)


 Capability:
   Capability-Announcement         : Off
   mLDP P2MP Capability            : Off
   mLDP MBB Capability             : Off
   mLDP MP2MP Capability           : Off

 Outbound&Inbound Policies applied:NULL
 Ipv4:
 outbound peer 2.2.2.2 fec none 
 
 Addresses received from peer: ( Count: 2 )
 2.2.2.2           10.1.2.2          
 ------------------------------------------------------------------------

Run the display gtsm statistics to view GTSM statistics on interface boards, including the number of LDP, BGP, BGP4+, and OSPF packets that are received, accepted, and dropped.

<HUAWEI> display gtsm statistics all
GTSM Statistics Table
---------------------------------------------------------------
SlotId  Protocol   Total Counters  Drop Counters  Pass Counters
---------------------------------------------------------------
2       BGP                    18              0             18
2       BGPv6                   0              0              0
2       OSPF                    0              0              0
2       LDP                     0              0              0
2       OSPFv3                  0              0              0
2       RIP                     0              0              0
---------------------------------------------------------------
Download
Updated: 2018-07-12

Document ID: EDOC1100028530

Views: 103048

Downloads: 336

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next