No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C00 Configuration Guide - MPLS 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring mLDP P2MP FRR Link Protection

Configuring mLDP P2MP FRR Link Protection

mLDP P2MP FRR link protection rectifies link faults on mLDP LSPs, which improves user network reliability.

Usage Scenario

With the growth of user services, the demands for using mLDP LSPs to carry multicast traffic are increasing, as well as link faults on mLDP LSPs. mLDP P2MP FRR link protection can be configured to prevent packet loss due to link faults.

NOTE:
mLDP P2MP FRR link protection does not support backup links on a TE tunnel.

Pre-configuration Tasks

Before configuring mLDP P2MP FRR link protection, configure an automatic P2MP TE tunnel.

Configuration Procedures

Perform one or more of the following configurations as required.

Download
Updated: 2018-07-12

Document ID: EDOC1100028530

Views: 102055

Downloads: 336

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next