No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C00 Configuration Guide - MPLS 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling mLDP P2MP FRR Link Protection

Enabling mLDP P2MP FRR Link Protection

The mLDP P2MP FRR link protection can be configured in the MPLS-LDP view.

Context

mLDP P2MP FRR link protection configured in the MPLS-LDP view enables a device to rapidly detect link faults and converge, which minimizes traffic loss.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    mpls ldp

    The MPLS-LDP view is displayed.

  3. Run:

    mldp p2mp

    mLDP P2MP is enabled globally.

  4. Run:

    mldp p2mp frr link-protection

    mLDP P2MP FRR link protection is enabled.

  5. Run:

    commit

    The configuration is committed.

Download
Updated: 2018-07-12

Document ID: EDOC1100028530

Views: 101817

Downloads: 336

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next