No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C00 Configuration Guide - MPLS 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview

Overview

Seamless MPLS is a bearer technique that extends MPLS techniques to access networks. Seamless MPLS establishes an E2E LSP across the access, aggregation, and core layers. All services can be encapsulated using MPLS at the access layer and transmitted along the E2E LSP across the three layers.

With current trends moving towards a flat network structure, metropolitan area networks (MANs) are steadily evolving into the Ethernet architecture, which calls for the application of MPLS on the MAN and access networks. To meet this requirement, seamless MPLS was developed. Seamless MPLS uses existing BGP, IGP, and MPLS techniques to establish an E2E LSP across the access, aggregation, and core layers, allowing end-to-end traffic to be encapsulated and forwarded using MPLS.

Download
Updated: 2018-07-12

Document ID: EDOC1100028530

Views: 102385

Downloads: 336

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next