No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C00 Configuration Guide - MPLS 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring an AGG and a Core ABR as RRs

Configuring an AGG and a Core ABR as RRs

In the intra-AS seamless MPLS networking, the AGG and core ABR can be configured as RRs so that CSGs and MASGs can learn one another's loopback routes. The loopback route information is used to establish an MP-IBPG peer relationship between each CSG and MASG.


  1. Run:


    The system view is displayed.

  2. Run:

    bgp { as-number-plain | as-number-dot }

    The BGP view is displayed.

  3. Run:

    ipv4-family unicast

    The IPv4 unicast address family view is displayed.

  4. Run:

    peer { ipv4-address | group-name } reflect-client

    An RR is configured, and the peer is specified as a client.

    The AGG's clients are its connected CSG and core ABR. The core ABR's clients are its connected AGG and MASG.

  5. Run:

    peer { ipv4-address | group-name } next-hop-local

    The device is configured to use its own IP address as the next-hop address of routes when advertising these routes.

    To enable the AGG or core ABR to advertise routes with the next-hop address set to a local address, run the peer next-hop-local command on the AGG or core ABR.

  6. Run:


    The configuration is committed.

Updated: 2018-07-12

Document ID: EDOC1100028530

Views: 102125

Downloads: 336

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next