No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C00 Configuration Guide - System Monitor 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining NetStream

Maintaining NetStream

This section describes how to maintain NetStream.

Monitoring the NetStream Operating Status

In routine maintenance, you can run the following command in any view to check the NetStream operating status.

Procedure

  • Run:

    display ip netstream cache origin slot slot-id

    Information about the NetStream flow buffer is displayed.

  • Run:

    display ip netstream statistics slot slot-id

    Statistics about NetStream flows are displayed.

  • Run:

    display ip netstream statistics interface interface-type interface-number

    Statistics about the sampled packets on an interface are displayed.

  • Run:

    display netstream { all | global | interface interface-type interface-number }

    NetStream configurations in different views are displayed.

  • Run:

    display ip netstream cache { as | as-tos | bgp-nexthop-tos | destination-prefix | destination-prefix-tos | index-tos | mpls-label | prefix | prefix-tos | protocol-port | protocol-port-tos | source-prefix | source-prefix-tos | source-index-tos  | vni-sip-dip  | vlan-id } slot slot-id

    Information about various aggregated flows in the buffer is displayed.

  • Run:

    display ip netstream export option

    Information about the output option template is displayed.

  • Run:

    display ipv6 netstream cache origin slot slot-id

    Information about the NetStream flow buffer is displayed.

  • Run:

    display ipv6 netstream cache { as | as-tos | bgp-nexthop-tos | destination-prefix | destination-prefix-tos | index-tos | prefix | prefix-tos | protocol-port | protocol-port-tos | source-prefix | source-prefix-tos | mpls-label | vlan-id } slot slot-id

    Information about various aggregated flows in the buffer is displayed.

  • Run:

    display ipv6 netstream statistics slot slot-id

    Statistics about NetStream flows are displayed.

Deleting NetStream Template Statistics

You can delete existing NetStream template statistics before collecting up-to-date statistics.

Procedure

  • Run the reset ip netstream statistics command to delete IPv4 NetStream template statistics.
  • Run the reset ipv6 netstream statistics command to delete IPv6 NetStream template statistics.
Download
Updated: 2018-07-12

Document ID: EDOC1100028538

Views: 29535

Downloads: 221

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next