No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C00 Configuration Guide - System Monitor 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Establishing the Configuration Task

Establishing the Configuration Task

Before configuring the Two-Way Active Measurement Protocol (TWAMP), familiarize yourself with the applicable environment, complete the pre-configuration tasks, and obtain the data required for the configuration. This will help you complete the configuration task quickly and efficiently.

Applicable Environment

TWAMP applies to scenarios in which statistics on the IP network performance must be quickly obtained but do not need to be highly accurate.

NOTE:
Currently, a Huawei device can function only as the server and session-reflector. To implement TWAMP, ensure that devices that can function as the control-client and session-sender exist on the network.

Pre-configuration Task

Before configuring TWAMP, complete the following tasks:

  • Ensure that devices that can function as the control-client and session-sender exist on the network and comply with standard protocols.

  • Ensure that the control-client and server are routable and the links between them work properly.

Data Preparation

To configure TWAMP, you need the following data.

No.

Data

1

(Optional) TCP port number and inactive interval for a control session.

2

(Optional) Inactive interval for a test session.

Download
Updated: 2018-07-12

Document ID: EDOC1100028538

Views: 28443

Downloads: 213

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next