No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C00 Configuration Guide - System Monitor 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Server

Configuring the Server

This section describes how to configure the TWAMP server, which responds to the control-client's request for establishing, starting, or stopping a TWAMP session.


  1. Run:


    The system view is displayed.

  2. Run:

    nqa twamp

    The TWAMP view is displayed.

  3. Run:


    The server function is enabled, and the server view is displayed.

  4. (Optional) Run:

    tcp port port-number [ all | vpn-instance  vpn-instance-name ]

    A TCP port is specified.

  5. (Optional) Run:

    control-session inactive inactive-interval

    An inactive interval is configured for a control session.

  6. (Optional) Run:

    client acl { basic-number | adv-number | acl-name }

    The ACL rule to be referenced is configured.

  7. Run:


    The configuration is committed.

Updated: 2018-07-12

Document ID: EDOC1100028538

Views: 31591

Downloads: 235

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next