No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C00 Configuration Guide - Virtual Access 01

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Virtual Access Solution Deployment

Virtual Access Solution Deployment

This chapter describes how to deploy and maintain the virtual access solution.

Networking Requirements

The virtual access solution significantly simplifies an access network, facilitates service deployment and maintenance, and reduces O&M costs. To implement end-to-end service bearing after establishing a virtual access system, deploy service features between a CE on the user side and a master and between a master and a PE on the network side. Figure 3-1 shows the typical networking for the virtual access solution.

Figure 3-1  Typical networking for the virtual access solution

Deployment Guidance

The following section describes configuration tasks required for the virtual access solution.

Download
Updated: 2018-07-12

Document ID: EDOC1100028541

Views: 7295

Downloads: 92

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next