About This Document
Purpose
This document describes how to install and configure the SAP HANA single-node system on the RH5885H and RH8100 V3 server.
By reading this document, you can learn the SAP HANA single-node solution and installation planning, OS installation and configuration, external storage configuration, and SAP HANA database installation.
Intended Audience
This document is intended for:
- Technical support engineers
- Maintenance engineers
- Users
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol |
Description |
|---|---|
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. |
|
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICE is used to address practices not related to personal injury. |
|
Calls attention to important information, best practices and tips. NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration. |
Change History
Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.
Issue 14 (2020-07-30)
This issue is the fourteenth official release:
- Updated Set up tuned to sap-hana.
- Updated Adjusting hdbparam parameter.
Issue 13 (2020-05-30)
This issue is the thirteenth official release:
Issue 12 (2020-03-14)
This issue is the twelfth official release. Added Solution to 100% Usage of the /hana/log Directory.
Issue 11 (2019-12-09)
This issue is the eleventh official release. Updated Configuring BIOS Parameters.
Issue 10 (2019-08-27)
This issue is the tenth official release. Updated Responsibility Matrix and Problem Handling Process.
Issue 09 (2019-06-13)
This issue is the ninth official release. Revised some graphics.
Issue 08 (2019-05-10)
This issue is the eighth official release. Updated SLES for SAP Lifecycle.
Issue 07 (2019-03-28)
This issue is the seventh official release. Updated Problem Handling Process.
Issue 06 (2018-12-26)
This issue is the sixth official release. Added Responsibility Matrix and Problem Handling Process.
Issue 05 (2018-09-25)
This issue is the fifth official release. Added SLES for SAP Lifecycle.
Issue 04 (2018-08-10)
This issue is the fourth official release. Added Registering and Activating the OS Subscriptions.
Issue 03 (2018-07-13)
This issue is the third official release.
Issue 02 (2017-11-02)
This issue is the second official release.
Issue 01 (2016-11-26)
This issue is the first official release.
