No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer G5500 Server G560 V5 Compute Node Maintenance and Service Guide 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Removing the Cover of the GP608

Removing the Cover of the GP608

Procedure

  1. Remove the GP608 from the G5500 chassis. For details, see Removing the GP608.
  2. Place the GP608 on the ESD floor.
  3. Holding down the button on the cover, push the cover backwards until it cannot move. See (1) and (2) in Figure 5-23.

    Figure 5-23 Removing the cover of the GP608

  4. Lift the cover off the GP608 and set it aside. See (3) in Figure 5-23.
Translation
Download
Updated: 2018-12-14

Document ID: EDOC1100031432

Views: 24087

Downloads: 39

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next