No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer G5500 Server G560 V5 Compute Node Maintenance and Service Guide 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing a 2.5-inch Drive

Installing a 2.5-inch Drive


  1. Determine the location for installing the drive. See Figure 5-116.

    Figure 5-116 Locations of 2.5-inch drives

  2. Take a spare drive out of its ESD bag.
  3. Open the ejector lever completely and insert the drive into the slot until it cannot move forward. See (1) in Figure 5-117.

    Figure 5-117 Installing a 2.5-inch drive

  4. Close the ejector lever. See (2) in Figure 5-117.
  5. Check whether the drive is installed successfully by observing the drive indicator status. For details, see Front Panel Indicators and Buttons.
Updated: 2018-12-14

Document ID: EDOC1100031432

Views: 40773

Downloads: 59

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next