No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer G5500 Server G560 V5 Compute Node Maintenance and Service Guide 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Removing a DIMM

Removing a DIMM

Procedure

  1. Power off the G560 V5. For details, see Powering Off the Compute Node.
  2. Remove the G560 V5. For details, see Removing the G560 V5.
  3. Place the G560 V5 on the ESD floor.
  4. Remove the cover. For details, see Removing the Cover of the G560 V5.
  5. Determine the DIMM to be removed.
  6. Lift the air duct of the DIMM to be removed. See Figure 5-51.

    Figure 5-51 Removing air ducts

  7. Open the two fixing clips on the DIMM slot simultaneously. See (1) in Figure 5-52.

    Figure 5-52 Removing a DIMM

  8. Remove the DIMM from the slot. See (2) in Figure 5-52.
  9. Place the removed DIMM in an ESD bag.
  10. Install a DIMM filler in the DIMM slot if you do not want to install a DIMM immediately.
Translation
Download
Updated: 2018-12-14

Document ID: EDOC1100031432

Views: 23801

Downloads: 39

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next