No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

FusionServer G5500 Server G560 V5 Compute Node Maintenance and Service Guide 04
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing a DIMM

Installing a DIMM


  1. Power off the G560 V5. For details, see Powering Off the Compute Node.
  2. Remove the G560 V5. For details, see Removing the G560 V5.
  3. Place the G560 V5 on the ESD floor.
  4. Remove the cover. For details, see Removing the Cover of the G560 V5.
  5. Take a spare DIMM out of its ESD bag.
  6. Simultaneously press the ejectors outwards. See Figure 5-53.

    Figure 5-53 Opening the fixing clips on the DIMM slot

  7. Align the DIMM with the DIMM slot, and insert the DIMM into the slot by gently pressing it down until it sits flush with the slot. See Figure 5-54.

    The two fixing clips pop up into place automatically.

    Figure 5-54 Installing a DIMM

  8. Vertically place the air duct downwards. See Figure 5-55.

    Figure 5-55 Installing air ducts

  9. Install the cover. For details, see Installing the Cover of the G560 V5.
  10. Install the G560 V5. For details, see Installing the G560 V5.
  11. Power on the G560 V5. For details, see Powering On the Compute Node.

Updated: 2020-03-05

Document ID: EDOC1100031432

Views: 45012

Downloads: 61

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next