No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer G5500 Server G560 V5 Compute Node Maintenance and Service Guide 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Removing the BIOS Battery

Removing the BIOS Battery

Procedure

  1. Power off the G560 V5. For details, see Powering Off the Compute Node.
  2. Remove the G560 V5. For details, see Removing the G560 V5.
  3. Place the G560 V5 on the ESD floor.
  4. Remove the cover. For details, see Removing the Cover of the G560 V5.
  5. Determine the location of the BIOS battery. See Figure 5-82.

    Figure 5-82 Location of the BIOS battery

  6. Push the latches in the arrow directions and lift the right end of the BIOS battery to remove it from the slot. See (1) and (2) in Figure 5-83.

    Figure 5-83 Removing the BIOS battery

  7. Place the removed BIOS battery in an ESD bag.
Translation
Download
Updated: 2018-12-14

Document ID: EDOC1100031432

Views: 27402

Downloads: 44

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next