No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer G5500 Server G560 V5 Compute Node Maintenance and Service Guide 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Removing the Cover of the GS608

Removing the Cover of the GS608


  1. Remove the GS608 from the G5500 chassis. For details, see Removing the GS608.
  2. Place the GS608 on the ESD floor.
  3. Holding down the button on the cover, push the cover backwards until it cannot move. See (1) and (2) in Figure 5-25.

    Figure 5-25 Removing the cover of the GS608

  4. Lift the cover off the GS608 and set it aside. See (3) in Figure 5-25.
Updated: 2018-12-14

Document ID: EDOC1100031432

Views: 39212

Downloads: 53

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next