No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer G5500 Server G560 V5 Compute Node User Guide 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Changing the Initial iBMC Password

Changing the Initial iBMC Password

  • To ensure system security, change your initial password at your first login and change the password periodically.
  • A simple password is easy to crack, which makes the system vulnerable. You are advised to use a password that meets complexity requirements or to enable the password complexity check function.
  • The password complexity check function is enabled by default.
Table 4-6 iBMC default user name and password

User Name

Default Password




This user is the default user of the iBMC, belongs to the administrator group, and has full rights to access all iBMC resources and perform all operations.

You can change an iBMC user password on the iBMC WebUI or CLI. The following describes how to change a user password on the iBMC WebUI. For details about how to change a user password on the iBMC CLI, see the FusionServer G5500 Server iBMC User Guide.


  1. Log in to the iBMC WebUI.
  2. On the iBMC WebUI, choose Configure > Local Users.

    The Local Users page is displayed.
    Figure 4-18 Local Users page

  3. Click in the line of the user whose password is to be changed.

    Figure 4-19 Changing the password

  4. Change the user password by following on-screen instructions.

    A password must meet the following complexity requirements:
    • Contains 8 to 20 characters.
    • Contains at least one space or one of the following special characters:


    • Contains at least two types of the following characters:
      • Lowercase letters: a to z
      • Uppercase letters: A to Z
      • Digits: 0 to 9
    • Cannot be the same as the user name or user name in reverse order.
    • Has at least two new characters when compared with the previous password.

Updated: 2018-12-14

Document ID: EDOC1100031433

Views: 44906

Downloads: 115

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next