No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer G5500 Server G560 V5 Compute Node User Guide 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installation Environment Requirements

Installation Environment Requirements


For details about the safety precautions to be observed when you install or replace servers and their parts, see Huawei Server Safety Information.


  • Install the G5500 in an access-restricted area.
  • Keep the area where the server is located clean and tidy.
  • Maintain a clearance of 800 mm (31.50 in.) at the front and rear of the cabinet to facilitate heat dissipation and device maintenance.

    The server draws in cool air from the front and exhausts hot air from the rear. Therefore, the front and rear of the cabinet must be well-ventilated for optimal heat dissipation.


  • Use a standard 19-inch cabinet that is more than 1000 mm (39.37 in.) deep and complies with the International Electrotechnical Commission 297 (IEC 297) standard.

    A G5500 is 4U high and stackable. No spacing needs to be reserved in between.

  • Install air filters on cabinet doors.
  • Provide AC power supply from the rear of the cabinet.

Temperature and Humidity

  • Use temperature control devices all year long in any climate.
  • In dry and humid areas, maintain ambient humidity within range with humidifiers and dehumidifiers respectively.
Table 4-1 Temperature and humidity requirements




5°C to 35°C (41°F to 95°F)


8% RH to 90% RH (non-condensing)

Updated: 2018-12-14

Document ID: EDOC1100031433

Views: 39325

Downloads: 104

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next