Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing a 3.5-inch Drive
Procedure
- Determine the location for installing the drive. Figure 5-35 shows the locations of drives.
- Take a spare drive out of its ESD bag.
- Open the ejector lever completely and insert the drive into the slot until it cannot move forward. See (1) in Figure 5-36.
- Close the ejector lever until it is locked in place. See (2) in Figure 5-36.
- Check whether the drive is installed successfully by observing the drive indicator status. For details, see Front Panel Indicators and Buttons.
