No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer G5500 Server G560 V5 Compute Node User Guide 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the iBMC

Configuring the iBMC

Set the iBMC IP address.

  1. Log in to the iBMC WebUI.

    For details, see Logging In to the iBMC WebUI.

  2. On the iBMC WebUI, choose Configuration on the menu bar, choose Network in the navigation tree, and select an IP version in the IP Address area, as shown in Figure 4-20.

    Figure 4-20 IP address configuration

  3. Configure the DNS in the DNS area, as shown in Figure 4-21.

    Figure 4-21 DNS configuration

  4. Enter the IP address.
  5. Click Save.
  6. Log in to the iBMC WebUI by using the manually specified IP address to verify the setting.
Updated: 2018-12-14

Document ID: EDOC1100031433

Views: 39832

Downloads: 107

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next