Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing the Cover of the GP608
Procedure
- Place the GP608 on the ESD floor.
- Align the nailheads on the cover with the U-shaped slots in the GP608 case, and place the cover vertically on the GP608. See (1) in Figure 3-13.
- Push the cover to the front of the GP608 until you hear a click sound, indicating that the cover is installed. See (2) in Figure 3-13.
Previous
