No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer G5500 Server G560 V5 Compute Node User Guide 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing the BIOS Battery

Installing the BIOS Battery


  1. Power off the G560 V5. For details, see Powering Off the Compute Node.
  2. Remove the G560 V5. For details, see Removing the G560 V5.
  3. Place the G560 V5 on the ESD floor.
  4. Remove the cover. For details, see Removing the Cover of the G560 V5.
  5. Determine the location for installing the BIOS battery. See Figure 5-27.

    Figure 5-27 Location of the BIOS battery

  6. Take a spare BIOS battery out of its ESD bag.
  7. Hold the BIOS battery with the side marked with texts facing upwards, insert the left end of the BIOS battery into the slot, and gently press down the BIOS battery until it is properly installed in the slot. See Figure 5-28.

    Figure 5-28 Installing the BIOS battery

  8. Install the cover. For details, see Installing the Cover of the G560 V5.
  9. Install the G560 V5. For details, see Installing the G560 V5.
  10. Power on the G560 V5. For details, see Powering On the Compute Node.
Updated: 2018-12-14

Document ID: EDOC1100031433

Views: 39857

Downloads: 107

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next