No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer G5500 Server G560 V5 Compute Node User Guide 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Installing the TPM

(Optional) Installing the TPM

Procedure

  1. Power off the G560 V5. For details, see Powering Off the Compute Node.
  2. Remove the G560 V5. For details, see Removing the G560 V5.
  3. Place the G560 V5 on the ESD floor.
  4. Remove the cover. For details, see Removing the Cover of the G560 V5.
  5. Determine the location for installing the TPM. See Figure 5-29.

    Figure 5-29 Location of the TPM

  6. Take a spare TPM out of its ESD bag.
  7. Insert the TPM vertically downwards into the connector on the mainboard. See (1) in Figure 5-30.

    Figure 5-30 Installing the TPM

  8. Tighten the screw of the TPM using a Phillips screwdriver. See (2) in Figure 5-30.
  9. Install the cover. For details, see Installing the Cover of the G560 V5.
  10. Install the G560 V5. For details, see Installing the G560 V5.
  11. Power on the G560 V5. For details, see Powering On the Compute Node.

Enabling the TPM

  1. Access the BIOS. For details, see Configuring the BIOS.
  2. Select Security.
  3. Select TPM Operation and press Enter.
  4. Select Enable and press Enter.
  5. Press F10.

    The Exit Saving changes? dialog box is displayed.

  6. Select Yes and press Enter.
  7. Press Esc to exit the BIOS.
  8. Restart the G560 for the TPM settings to take effect.
Translation
Download
Updated: 2018-12-14

Document ID: EDOC1100031433

Views: 41209

Downloads: 107

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next