No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer G5500 Server G560 V5 Compute Node User Guide 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing an OS

Installing an OS

This section describes how to install an OS for the G560 V5.

Use the Huawei Server Compatibility Checker to check OSs supported by the G560 V5. You are advised to install an OS on an HDD.

Currently, only Red Hat Enterprise Linux (RHEL) 7.1 supports orderly hot swap of NVMe SSDs.

For details about how to install an OS on an HDD, see the Huawei Server OS Installation Guide.

For details about how to install an OS on an NVMe SSD, see Directly Installing an OS in the Huawei Server OS Installation Guide.

After installing the operating system on a server with a GPU card, you need to install the NVIDIA GPU driver before continuing with subsequent service deployment. For details, see the NVIDIA GPU Card Driver Installation Guide.

NOTE:

To upgrade the NVMe SSD driver, download the driver file from the vendor's official website.

Translation
Download
Updated: 2018-12-14

Document ID: EDOC1100031433

Views: 41221

Downloads: 107

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next