No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer G5500 Server iBMC (V300 or Later) User Guide 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting User Rights (privilege)

Setting User Rights (privilege)

Function

The privilege command is used to set user rights.

Format

ipmcset [-t user] -d privilege -v <username> <privalue>

Parameters

Parameter Description Value
username Specifies the user to be set. -
privalue Specifies user rights.
  • 15: No Access
  • 2: User
  • 3: Operator
  • 4: Administrator
  • 5: Custom Role 1
  • 6: Custom Role 2
  • 7: Custom Role 3
  • 8: Custom Role 4

Usage Guidelines

  • Only administrators can set user rights, and the administrator's password is required.

  • This command cannot be used to set rights of default users.

  • This command cannot be used to set the rights of online users.

Example

# Grant user test with the Administrator rights.

iBMC:/->ipmcset -d privilege -v test 4
Input your password:
Set user privilege successfully.
Translation
Download
Updated: 2018-10-31

Document ID: EDOC1100031438

Views: 88951

Downloads: 49

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next