No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer G5500 Server iBMC (V300 or Later) User Guide 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modifying Logical Drive Properties (ldconfig)

Modifying Logical Drive Properties (ldconfig)


The ldconfig command is used to modify properties of a logical drive.


ipmcset -t storage -d ldconfig -v <control_id> <ldid> <[-name <ldname>] [-rp <rpvalue>] [-wp <wpvalue>] [-iop <iopvalue>] [-ap <apvalue>] [-bgi <bgistate>] [-boot] [-sscd <initmode>]






Specifies the ID of the RAID controller.

0 to 255
ldid Specifies the ID of the logical drive to be modified. 0 to 255
ldname Specifies the name of the logical drive to be modified. The parameter value cannot exceed 15 characters.
rpvalue Specifies the read policy of the logical drive.
  • ra: Read Ahead
  • nra: No Read Ahead
wpvalue Specifies the write policy of the logical drive.
  • wt: Write Through
  • wb: Write Back
  • wbwithbbu: Write Back with BBU
iopvalue Specifies the IO policy of the logical drive.
  • cio: Cached IO
  • dio: Direct IO
apvalue Specifies the access policy of the logical drive.
  • rw: The logical drive is readable and writable.
  • ro: The logical drive is read only.
  • blocked: The logical drive is hidden.
bgistate Specifies the BGI status of the logical drive.
  • enabled
  • disabled
initmode Specifies the setting of SSD Caching (whether to use the CacheCade drive as the cache).
  • enabled
  • disabled

Usage Guidelines

If the command contains -boot, the logical drive is the boot device.

This command can be used only when either of the following conditions is met:


# Modify the properties of logical drive 1 under RAID controller 0.

iBMC:/-> ipmcset -t storage -d ldconfig -v 0 1 -name example -rp ra -wp wb -ap rw -iop cio -dcp enabled –bgi enabled -boot
WARNING: The operation may have many adverse effects.
	Do you want to continue?[Y/N]:y
Updated: 2018-10-31

Document ID: EDOC1100031438

Views: 93249

Downloads: 49

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next