No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer G5500 Server iBMC (V300 or Later) User Guide 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Importing an SSL Certificate (certificate -d import)

Importing an SSL Certificate (certificate -d import)

Function

The certificate -d import command is used to import a Secure Sockets Layer (SSL) certificate to the iBMC.

Format

ipmcset -t certificate -d import -v <filepath | file_URL> <type> [passphrase]

Parameters

Parameter

Description

Value

filepath

Specifies the directory in which the SSL certificate is to be imported.

NOTE:
The certificate must be in the *.pfx or *.p12 format and cannot exceed 100 KB.
Absolute path of the certificate on the iBMC, for example, /tmp/test.pfx.
file_URL

Specifies the URL of the SSL certificate to be imported.

Format:

protocol://username:password@IP:[port]/directory/filename

Where:

  • protocol must be https, sftp, cifs, or scp.
  • username indicates the user name used to log in to the target server.
  • password indicates the password used to log in to the target server.
  • IP:[port] indicates the IP address and port number of the target server.
  • directory/filename indicates the absolute path of the SSL certificate on the target server.

For example, https://root:Huawei12#$@10.10.10.1:443/tmp/test.pfx.

type

Specifies the type of the SSL certificate.

It has a fixed value of 1.
passphrase

Specifies the password for the SSL certificate.

This password can be empty.

Usage Guidelines

Before running this command, use a file transfer tool that supports SFTP, for example WinSCP, to transfer the SSL certificate to the specified directory (for example /tmp) of the iBMC file system.

Example

Import an SSL certificate.

iBMC:/-> ipmcset -t certificate -d import -v /tmp/test-01.pfx 1 Huawei12#$ 
Import certificate successfully
Reset iBMC for the certificate to take effect. 
Translation
Download
Updated: 2018-10-31

Document ID: EDOC1100031438

Views: 89788

Downloads: 49

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next