No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer G5500 Server iBMC (V300 or Later) User Guide 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


Function Description

Fault Diagnose Management (FDM) provides automatic fault diagnosis of the entire system. FDM includes fault data collection and analysis, fault diagnosis and locating, fault prewarning, and device health analysis.

During routine operation and maintenance, you can view information about the faulty components and related historical events on the page, and take troubleshooting measures.

The FDM function is available only after it is enabled on the BIOS.

  • On the BIOS of the Purley platform, choose Advanced > System Event Log > FDM and set the FDM function.
  • The fault diagnosis results displayed on the FDM PFAE page rely on the data provided by the FDM system. The FDM health report function is not supported.


Choose Diagnostics from the main menu, and select FDM PFAE from the navigation tree.

The FDM PFAE page is displayed.

Updated: 2018-10-31

Document ID: EDOC1100031438

Views: 89084

Downloads: 49

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next