No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer G5500 Server iBMC (V300 or Later) User Guide 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting Weak Password Check State (weakpwddic)

Setting Weak Password Check State (weakpwddic)

Function

The weakpwddic command can be used to enable or disable weak password check.

The password in the weak password dictionary cannot be used as any of the following:
  • Local user password
  • SNMPv1/v2c read-only or read/write community name
  • SNMPv3 encryption password

Format

ipmcset -t user -d weakpwddic -v <enabled | disabled>

Parameters

Parameter Description Value
enabled

Enables weak password check.

disabled

Disables weak password check.

Usage Guidelines

This command is available only for the G530 V5 and G560 V5.

Example

# Enable weak password check.

iBMC:/-> ipmcset -t user -d weakpwddic -v enabled
Enable weak password dictionary check successfully.
Translation
Download
Updated: 2018-10-31

Document ID: EDOC1100031438

Views: 89496

Downloads: 49

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next