No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer G5500 Server iBMC (V300 or Later) User Guide 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying and Setting User Inactive Period (securityenhance -d inactivetimelimit)

Querying and Setting User Inactive Period (securityenhance -d inactivetimelimit)


The securityenhance -d inactivetimelimit command is used to query and set the user inactive period. If a user does not perform any operation during the specified period, the user will be disabled.


ipmcset -t securityenhance -d inactivetimelimit -v <value>

ipmcget -t securityenhance -d inactivetimelimit


Parameter Description Value
value Inactive period (in days).
  • 0
  • 30 to 365

The value 0 indicates unlimited time, that is, the user will never be disabled.

Usage Guidelines



# Set the user inactive period to 30 days.

iBMC:/-> ipmcset -t securityenhance -d inactivetimelimit -v 30
WARNING: This operation could lead to iBMC users be disabled when users' inactive time is overdue.
Do you want to continue?[Y/N]y
Set inactive user timelimit successfully.

# Query the user inactive period.

iBMC:/-> ipmcget -t securityenhance -d inactivetimelimit
User inactive timelimit: 30
Updated: 2018-10-31

Document ID: EDOC1100031438

Views: 92378

Downloads: 49

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next