No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer G5500 Server iBMC (V300 or Later) User Guide 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Testing Reachability of the Syslog Server (syslog -d test)

Testing Reachability of the Syslog Server (syslog -d test)


The syslog -d test command is used to test whether the syslog server is reachable.


ipmcset -t syslog -d test -v <destination>


Parameter Description Value
destination Specifies the number of a syslog reporting channel. 1 to 4

Usage Guidelines



# Test whether the syslog server for channel 1 is reachable.

iBMC:/-> ipmcset -t syslog -d test -v 1
Test syslog dest1 successfully.
Updated: 2018-10-31

Document ID: EDOC1100031438

Views: 92394

Downloads: 49

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next