No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer G5500 Server iBMC (V300 or Later) User Guide 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting an Emergency User (emergencyuser)

Setting an Emergency User (emergencyuser)


The emergencyuser command is used to set an emergency user, which is not restricted by any login rule.


ipmcset [-t user] -d emergencyuser -v username


Parameter Description Value
username Emergency user name. -

Usage Guidelines

Only an administrator can set an emergency user.


# Set root as an emergency user.

iBMC:/->ipmcset -d emergencyuser -v root
Set emergency user to (root) successfully.
Updated: 2018-10-31

Document ID: EDOC1100031438

Views: 88991

Downloads: 49

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next