No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer G5500 Server iBMC (V300 or Later) User Guide 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying and Setting the SNMP Trap Version (trap -d version)

Querying and Setting the SNMP Trap Version (trap -d version)

Function

The trap -d version command is used to query and set the SNMP trap version.

Format

ipmcget -t trap -d version

ipmcset -t trap -d version -v <V1 | V2C | V3>

Parameters

Parameter Description Value
V1 Indicates SNMPv1. -
V2C Indicates SNMPv2c. -
V3 Indicates SNMPv3. -

Usage Guidelines

The default value is V1. However, V3 is recommended. Exercise caution when using V1 and V2C, because they pose security risks.

Example

# Set the SNMP trap version to SNMPv2c.

iBMC:/->ipmcset -t trap -d version -v V2C
Set trap V2C success.

# Query the SNMP trap version.

iBMC:/->ipmcget -t trap -d version
Trap version : V2C
Translation
Download
Updated: 2018-10-31

Document ID: EDOC1100031438

Views: 92596

Downloads: 49

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next