No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer G5500 Server iBMC (V300 or Later) User Guide 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the UID Indicator Status (locate)

Setting the UID Indicator Status (locate)

Function

The locate command is used to set the Unit Identification (UID) indicator status of a hard disk. The UID indicator helps locate a hard disk in a chassis.

Format

ipmcset -d locate -v <ID> <Action>

Parameters

Parameter

Description

Value

ID

Specifies the ID of a hard disk.

0 to 255
Action

Specifies the UID indicator status.

  • start: turns on the UID indicator of a hard disk.
  • stop: turns off the UID indicator of a hard disk.

Usage Guidelines

Before running this command, ensure that the following conditions are met:

If Action is start, the UID indicator of the hard disk will keep blinking.

Example

# Turn on the UID indicator of hard disk 5.

iBMC:/->ipmcset -d locate -v 5 start
start locating physical drive (ID:5) successfully
Translation
Download
Updated: 2018-10-31

Document ID: EDOC1100031438

Views: 89380

Downloads: 49

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next