No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer G5500 Server iBMC (V300 or Later) User Guide 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Black Box

Black Box

Function Description

The Black Box page allows you to enable or disable the black box function and download data from the black box memory.

A black box consists of memory and fault monitoring software.
  • The memory is a built-in storage chip that records fault information, independent of hard disks on the server.

    The memory provides a maximum of 4 MB storage capacity, and saves kernel information when the OS crashes.

  • The fault monitoring software records kernel information when the OS crashes.

    Before using the black box function, ensure that the fault monitoring software (for example, iBMA) has been installed on the server. For details about how to install and use the iBMA, see iBMA User Guide.

  • If the black box driver has not been installed on G530 V5 and G560 V5 after the black box function is enabled, unknown devices may be detected on the OS.


Choose Diagnostics from the main menu, and select Black Box from the navigation tree.

The Black Box page is displayed.

Parameter Description

Table 3-28  Parameters on the Black Box page



Black Box

Specifies whether to enable the black box function. This function is disabled for G560 and enabled for G530 V5 and G560 V5 by default.

  • : The black box is enabled.
  • : The black box is disabled.

File Name

Server data file monitored by the black box.

File Size

Size of the server data file monitored by the black box.


Enabling the Black Box Function

After enabling or disabling the black box function, restart the server for the setting to take effect.
  1. On the menu bar, choose Diagnostics.
  2. In the navigation tree, choose Black Box.

    The Black Box page is displayed.

  3. Set Black Box to .
  4. Restart the server.

Disabling the Black Box Function

  1. Set Black Box to .
  2. Restart the server.

Downloading Black Box Data

Ensure that the black box function is enabled.
  1. On Internet Explorer, choose Tools > Internet Options.

    The Internet Options dialog box is displayed.

  2. Click the Security tab, select Internet from the list box, click Custom Level, and click Enable for Automatic prompting for file downloads under Download.
  3. On the iBMC WebUI, choose Diagnostics > Black Box.
  4. Click Download.

    The Save dialog box is displayed.

  5. Select a local directory for saving the file.
  6. Click Save.

    The black box data file is saved to the specified directory on the local PC.

    • The iBMC only downloads the black box data file from the server to the local PC, but does not parse this file. For details about how to parse a black box data file, see the server installation guide.

    • The file saving information displayed varies with the browser used.

Updated: 2018-10-31

Document ID: EDOC1100031438

Views: 92548

Downloads: 49

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next