No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer G5500 Server iBMC (V300 or Later) User Guide 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the Fan Mode (fanmode)

Setting the Fan Mode (fanmode)

Function

The fanmode command is used to set the fan mode.

Format

ipmcset -d fanmode -v <mode> [timeout]

Parameters

Parameter Description Value
mode Specifies the fan mode.
  • 0: automatic mode

    In this mode, timeout need not be specified.

  • 1: manual mode

    In this mode, timeout must be specified.

timeout Specifies the time period (in seconds) after which a manual-to-automatic switchover is triggered.

Default value: 30

The value 0 indicates that the fan mode will not be switched over.

Usage Guidelines

The fan work mode changes to automatic in any of the following scenarios:

  • The iBMC restarts.
  • The server is powered off.
  • The switchover from the manual to automatic mode times out.

Example

# Set the fan mode to manual and the timeout period to 60 seconds.

iBMC:/->ipmcset -d fanmode -v 1 60
Set fan mode successfully.
Current Mode:       manual
Time out    :       60 seconds
Translation
Download
Updated: 2018-10-31

Document ID: EDOC1100031438

Views: 89226

Downloads: 49

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next