No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

XH321L V5 Server Node V100R005 Maintenance and Service Guide 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to the Server Node Using the IRC

Logging In to the Server Node Using the IRC

Download the Independent Remote Console (IRC) at IRC.

Windows

Supported OSs:

  • Windows 7 32-bit or 64-bit
  • Windows 8 32-bit or 64-bit
  • Windows 10 32-bit or 64-bit
  • Windows Server 2008 R2 32-bit or 64-bit
  • Windows Server 2012 64-bit
  1. Configure an IP address for the client (PC) to enable communication between the client and the iBMC.

    The IP address configured and the iBMC management network port IP address must be on the same network segment.

  2. Double-click KVM.exe.

    A dialog box similar to the one shown in Figure 10-7 is displayed.

    Figure 10-7 Login interface

  3. Enter the network address, user name, and password.

    The network address can be in any of the following formats:

    • iBMC management network port IP address (IPv4 or IPv6 address):Port number
    • iBMC domain name address:Port number
    NOTE:
    • Enter an IPv6 address in brackets or an IPv4 address directly, for example, [2001::64]:444 or 192.168.100.1:444.
    • When the port number is the default port number 443, the port number can be left blank.

  4. Select a login mode, and click Connect.

    • Shared Mode: allows two users to access and manage a server at the same time. The two users can see each other's operations.
    • Private Mode: allows only one user to access and manage a server at a time.

    Information shown in Figure 10-8 is displayed.

    Figure 10-8 Security risk information

  5. Perform any of the following operations based on the actual situation:

    • Click Yes to open the IRC.
    • Click No to return to the login interface.
    • Click Import CA to import the CA certificate (*.cer, *.crt, or *.pem). After the CA certificate is imported, the security risk dialog box will no longer be displayed.

    The IRC of the server is displayed, as shown in Figure 10-9.

    Figure 10-9 IRC of the server

Ubuntu

Supported OSs: Ubuntu 14.04 LTS and Ubuntu 16.04 LTS

  1. Configure an IP address for the client (PC) to enable communication between the client and the iBMC.

    The IP address configured and the iBMC management network port IP address must be on the same network segment.

  2. Open the console and set the folder where the IRC is stored as the working folder.
  3. Run the chmod 777 KVM.sh command to set the permission for the IRC.
  4. Run ./KVM.sh to start the IRC.

    A dialog box similar to the one shown in Figure 10-10 is displayed.

    Figure 10-10 Login interface

  5. Enter the network address, user name, and password.

    The network address can be in any of the following formats:

    • iBMC management network port IP address (IPv4 or IPv6 address):Port number
    • iBMC domain name address:Port number
    NOTE:
    • Enter an IPv6 address in brackets or an IPv4 address directly, for example, [2001::64]:444 or 192.168.100.1:444.
    • When the port number is the default port number 443, the port number can be left blank.

  6. Select a login mode, and click Connect.

    • Shared Mode: allows two users to access and manage a server at the same time. The two users can see each other's operations.
    • Private Mode: allows only one user to access and manage a server at a time.

    Information shown in Figure 10-11 is displayed.

    Figure 10-11 Security risk information

  7. Perform any of the following operations based on the actual situation:

    • Click Yes to open the IRC.
    • Click No to return to the login interface.
    • Click Import CA to import the CA certificate (*.cer, *.crt, or *.pem). After the CA certificate is imported, the security risk dialog box will no longer be displayed.

    The IRC of the server is displayed, as shown in Figure 10-12.

    Figure 10-12 IRC of the server

Mac OS

Supported OS: Mac OS X El Capitan

  1. Configure an IP address for the client (PC) to enable communication between the client and the iBMC.

    The IP address configured and the iBMC management network port IP address must be on the same network segment.

  2. Open the console and set the folder where the IRC is stored as the working folder.
  3. Run the chmod 777 KVM.sh command to set the permission for the IRC.
  4. Run ./KVM.sh to start the IRC.

    A dialog box similar to the one shown in Figure 10-13 is displayed.

    Figure 10-13 Login interface

  5. Enter the network address, user name, and password.

    The network address can be in any of the following formats:

    • iBMC management network port IP address (IPv4 or IPv6 address):Port number
    • iBMC domain name address:Port number
    NOTE:
    • Enter an IPv6 address in brackets or an IPv4 address directly, for example, [2001::64]:444 or 192.168.100.1:444.
    • When the port number is the default port number 443, the port number can be left blank.

  6. Select a login mode, and click Connect.

    • Shared Mode: allows two users to access and manage a server at the same time. The two users can see each other's operations.
    • Private Mode: allows only one user to access and manage a server at a time.

    Information shown in Figure 10-14 is displayed.

    Figure 10-14 Security risk information

  7. Perform any of the following operations based on the actual situation:

    • Click Yes to open the IRC.
    • Click No to return to the login interface.
    • Click Import CA to import the CA certificate (*.cer, *.crt, or *.pem). After the CA certificate is imported, the security risk dialog box will no longer be displayed.

    The IRC of the server is displayed, as shown in Figure 10-15.

    Figure 10-15 IRC of the server

Download
Updated: 2019-01-08

Document ID: EDOC1100033003

Views: 7981

Downloads: 12

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next