No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

XH321L V5 Server Node V100R005 Maintenance and Service Guide 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Indicators and Buttons

Indicators and Buttons

You can observe the indicators to determine the current status of the XH321L V5.

Figure 6-4 shows the indicators and buttons on the XH321L V5 panel.

Figure 6-4 Node panel indicators and buttons

No.

Silk Screen

Name

State Description

1

-

Transmission rate indicator

  • Off: The network port is not connected.
  • Steady green: The data transmission rate is 10 Gbit/s.
  • Steady yellow: The data transmission rate is 1 Gbit/s.

2

-

Connection status indicator/Data transmission status indicator

  • Off: The network port is not connected.
  • Blinking green: Data is being transmitted.
  • Steady green: The network port is properly connected.

3

Power button/indicator

Power indicator

  • Off: The server node is not connected to a power source.
  • Steady yellow: The server node is ready to power on.
  • Blinking yellow: The iBMC is starting.
  • Steady green: The server node is properly powered on.

Power button

  • When the server node is powered on, you can press this button to shut down the OS.
  • When the server node is powered on, holding down this button for 6 seconds will power off the server node.
  • When the server node is ready to be powered on, you can press this button to start the server node.

4

Health status indicator

  • Off: The server node is not powered on or abnormal.
  • Blinking red at 1 Hz: A major alarm is generated for the server node.
  • Blinking red at 5 Hz: A critical alarm is generated for the server node.
  • Steady green: The server node is operating properly.

5

UID button/indicator

The UID button/indicator helps identify and locate a server node in a chassis. You can turn on or off the UID indicator by pressing the UID button or by using the iBMC CLI or WebUI.

UID indicator

  • Off: The server node is not being located.
  • Blinking blue: The server node has been located and is distinguished from other server nodes that have also been located.
  • Steady blue: The server node has been located.

UID button

  • You can press this button to turn on or off the UID indicator.
  • You can press and hold down this button for 4 to 6 seconds to reset the iBMC.

6

-

Data transmission status indicator

  • Off: No data is being transmitted.
  • Blinking yellow: Data is being transmitted.

7

-

Connection status indicator

  • Off: The network port is not connected.
  • Steady green: The network port is properly connected.

8

-

Data transmission status indicator

  • Off: No data is being transmitted.
  • Blinking yellow: Data is being transmitted.

9

-

Connection status indicator

  • Off: The network port is not connected.
  • Steady green: The network port is properly connected.
Download
Updated: 2019-01-08

Document ID: EDOC1100033003

Views: 9309

Downloads: 12

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next