No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

XH321L V5 Server Node V100R005 Maintenance and Service Guide 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Avago SAS3004iMR RAID Controller Card

Avago SAS3004iMR RAID Controller Card

Removing an Avago SAS3004iMR RAID Controller Card

  1. Wear ESD gloves.
  2. Remove all M.2 SSD modules from the Avago SAS3004iMR RAID controller card. For details, see M.2 SSD Module in an Avago SAS3004iMR RAID Controller Card.
  3. Remove the Avago SAS3004iMR RAID controller card. For details, see PCIe Card on the Riser Card.
  4. Place the removed Avago SAS3004iMR RAID controller card in an ESD bag.

Installing an Avago SAS3004iMR RAID Controller Card

  1. Wear ESD gloves.
  2. Take a spare Avago SAS3004iMR RAID controller card out of the ESD bag.
  3. Install the Avago SAS3004iMR RAID controller card. For details, see PCIe Card on the Riser Card.
  4. Install the M.2 SSD modules on the Avago SAS3004iMR RAID controller card. For details, see M.2 SSD Module in an Avago SAS3004iMR RAID Controller Card.
Download
Updated: 2019-01-08

Document ID: EDOC1100033003

Views: 9327

Downloads: 12

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next