No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


XH321L V5 Server Node V100R005 Maintenance and Service Guide 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Riser Card

Riser Card

Removing the Riser Card

  1. Remove the PCIe card from the PCIe card tray. For details, see PCIe Card on the Riser Card.
  2. Unscrew the riser card using an M3 Phillips screwdriver. See (1) in Figure 3-22.

    Figure 3-22 Removing the riser card

  3. Remove the riser card. See (2) in Figure 3-22.
  4. Place the removed riser card in an ESD bag.

Installing the Riser Card

  1. Take a spare riser card out of its ESD bag.
  2. Insert the riser card into the PCIe tray. See (1) in Figure 3-23.

    Figure 3-23 Installing the riser card

  3. Screw in the riser card using an M3 Phillips screwdriver. See (2) in Figure 3-23.
Updated: 2019-01-08

Document ID: EDOC1100033003

Views: 10602

Downloads: 12

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next