Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
System Power-On
Prerequisites
- You have completed the power-on check.
- The SmartLogger has been powered on.
- You have put on insulation gloves.
Procedure
- Turn on the three-phase power switch for the busbar on the low-voltage side of the box-type transformer.
- Turn on the miniature circuit breaker in the box-type transformer.
- Turn on the PID module input switch in
the smart array controller.
- If the smart array controller is equipped with one PID module, turn on the PID module switch QF03.
- If the smart array controller is equipped with two PID modules, turn on the PID module switches QF03 and QF05.
- Turn on the three-phase input switch in
the smart array controller.
- If the smart array controller is equipped with one PID module, turn on the switch QF02.
- If the smart array controller is equipped with two PID modules, turn on the switches QF02 and QF04.