Label Conventions
Labels
Label |
Name |
Meaning |
|---|---|---|
Danger high voltage label |
High voltage exists after the PID module is powered on. Only qualified electrical technicians are allowed to operate the device. |
|
Operation warning label |
High voltage exists after the PID module is powered on. Therefore, the AC switch must be turned off before you operate the device. |
|
Scald hazard label |
The PID module surface is hot, and you will be scalded if touching the surface. |
|
Anti-dropping label |
When taking the PID module out of the smart array controller, hold the bottom of the PID module to prevent it from falling off. |
|
Installation or removal reminder label |
When installing or removing cables for the PID module, insert a 3x150 flat-head screwdriver into the hole at a tilt of 30–50 degrees to facilitate installation or removal. |
|
Warranty label |
Never open the host panel of the PID module. |
Nameplate
On the side of the PID module, there is a nameplate that contains the model information, technical specifications, and compliance symbols, as shown in Figure 2-8.
| (1) Trademark, product name, and model number | (2) Important technical specifications |
| (3) Compliance symbols | (4) Company name and country of manufacture |
NOTE: Symbol |
Name |
Meaning |
|---|---|---|
 |
CSA certification of America and Canada |
The device complies with CSA certification standards. |
 |
CE certification mark |
The device complies with Conformité Européenne (CE) certification standards. |
 |
Environmentally friendly use period (EFUP) |
The PID module is environmentally friendly for the specified period. |
 |
EU WEEE mark |
Do not dispose of the PID module as household garbage. |