Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview
- Introduction
- Appearance
- Installation Positions
- Working Principle
A PID module is used in a PV array that comprises SUN2000s and is often installed in a smart array controller. In the scenario with a double-column transformer, the DC capacity of the PV array should be less than or equal to 10 MW. In the scenario with a dual-split transformer, the DC capacity of the PV array should be less than or equal to 16 MW. - Networking
- Label Conventions