Installation Positions
Figure 2-4 shows the positions for the PID module and other components in the smart array controller. Table 2-2 describes the components.
Figures in this section show the smart array controller configured with a power adapter and two PID modules. The smart array controller with one PID module does not contain the PID02 input switch, three-phase SPD 2, PLC CCO module, three-phase input switch 2, and PID02 module.
NOTE: To highlight the involved area, the figure does not show the open door.
No. |
Name |
Specifications |
Quantity |
Label |
|---|---|---|---|---|
1 |
Functional earthing bar |
N/A |
1 |
|
2 |
Power adapter |
|
1 |
U01 |
3 |
PID01 input switch |
AC: 3 A/3 P |
1 |
QF03 |
4 |
PID02 input switch |
AC: 3 A/3 P |
1 |
QF05 |
5 |
Single-phase SPD |
Uc = 385 V AC 30 kA/60 kA, 8/20 μs |
3 |
F03 |
6 |
Three-phase SPD 1 |
Uc = 680 V AC 20 kA/40 kA, 8/20 μs |
4 |
F01 |
7 |
Three-phase SPD 2 |
Uc = 680 V AC 20 kA/40 kA, 8/20 μs |
4 |
F02 |
8 |
Position for the LAN switch |
N/A |
1 |
SWITCH |
9 |
MBUS (PLC) CCO |
PLC CCO01A |
1 |
PLC CCO |
10 |
PE bar |
N/A |
1 |
N/A |
11 |
SmartLogger |
SmartLogger2000 |
1 |
SmartLogger (SL) |
12 |
Fiber adapter |
2LC/PC-2LC/PC-4 |
2 |
|
13 |
Position for the POE SPD |
N/A |
1 |
N/A |
14 |
Position for the POE module |
N/A |
1 |
POE |
15 |
ATB |
N/A |
1 |
ATB |
16 |
Single-phase input switch |
32 A/2 P |
1 |
QF01 |
17 |
Three-phase input switch 2 |
32 A/3 P |
1 |
QF04 |
18 |
Three-phase input switch 1 |
32 A/3 P |
1 |
QF02 |
19 |
RS485 communications terminal |
12P/supporting 1–2.5 mm2 (or 18–14 AWG) cable connection |
1 |
JX01 |
20 |
PID02 |
SmartPID2000 |
1 |
PID02 |
21 |
PID01 |
SmartPID2000 |
1 |
PID01 |
